AIM P30 & P50 Ozone Generators
With its cutting-edge design and performance, AIM P30 and AIM P50 with PlasmaBlock® technology promises to enhance ozone generation efficiency, safety, and environmental impact. This technology uses plasma reactors or electrodes to generate ozone, and it can enhance the efficiency and effectiveness of ozone generation. This safe, reliable, and quiet ozone generator can benefit many high-pressure applications.
The AIM P30 and AIM P50 ozone generators are designed to operate nominally at a rate of 20-50 grams per hour. Achieving concentrations above 5% by weight requires supplying high-purity oxygen feed gas, along with the appropriate back pressure. The generator must be used with a positive-pressure air preparation device and a minimum back pressure of 5 psi.
AIM P30 & P50 Ozone Generator Sales Sheet
FEATURES:
-Modular design
-Airflow interlock switch
-Integrated fail-safe shutdown
-Automatic overvoltage and overcurrent protection
-Air-cooled thermal management
-LED status and alarm indicators
-Powder-coated aluminum chassis
-Dual voltage input capability
ENHANCED OZONE OUTPUT & ELECTRICAL EFFICIENCY
AIM P Series systems utilize PlasmaBlock® architecture to achieve elevated ozone concentrations with optimized power consumption. Higher conversion efficiency allows greater ozone production per watt, supporting reduced operating costs and improved system performance.
HIGH-PURITY OZONE GENERATION
Engineered for clean ozone production, the platform delivers ozone with extremely low contaminant carryover. High-purity output helps maximize oxidation effectiveness while minimizing unwanted by-products in sensitive applications.
CONSISTENT AND STABLE OZONE PERFORMANCE
Advanced plasma control enables repeatable ozone concentration and output stability over extended run times. Reliable production supports applications that depend on precise and predictable ozone dosing.
PLASMAVIEW® ADVANCED DIAGNOSTICS & CONNECTIVITY
Integrate AIM P30 or AIM P50 PlasmaBlock® units with PlasmaView® or PlasmaLink® software for real-time monitoring and system analytics. Access performance metrics, troubleshooting tools, and historical data locally or through remote connectivity to support proactive maintenance and optimization.
| SPECIFICATIONS | ||||
|---|---|---|---|---|
| Model | Ozone Output | Operating Voltage | Power Consumption | Dimensions |
| AIM P30 | 30 g/hr | 115 Vac or 230 Vac, 50/60 Hz regulated to 12 Vdc/2A | Standby Mode: 16 Watts Ozone Enabled Mode: 207 Watts | 24.25” x 12.77”x 12.25” |
| AIM P50 | 50 g/hr | 120 Vac or 240 Vac, 50/60 Hz | Standby Mode: 27 Watts Ozone Enabled Mode: 400 Watts | 24.25” x 12.77” x 12.25” |